Skip to content
Penny
Log inTry Penny free

Setup guide · About 2 minutes · Starter and above

Forward calls from AT&T to Penny

Keep your AT&T business number. Send Penny the calls you miss or every call, then check the route from a second phone.

Time estimate excludes account approvals and carrier support.

Before you begin

  • Your assigned Penny number
  • Access to the line you are forwarding
  • A second phone to check the original business number
AT&T selected in Penny’s forwarding controls
The dashboard shows the selected carrier’s overflow recipe. Sample screen; use the assigned number in your own account.

Step 1

Confirm the carrier and plan on the original line

Confirm the carrier and plan that control your business number. Business systems and older plans can have different forwarding settings from a standard mobile line.

Step 2

Choose the forwarding mode and enter your destination

The instructions below match your dashboard’s carrier guide. ‘Your Penny number’ means the number assigned in Numbers, with the area code. Use that destination rather than the public demo line.

Overflow lets your team answer first. All-call forwarding sends every incoming call to Penny. Follow the row for the mode you want.

Step 3

Call the original number from another phone

For all-call forwarding, confirm that Penny answers the business line. For overflow, test both a busy line and an unanswered call. Then check that a call the office answers still behaves as expected.

Step 4

Check the disable procedure while the test is fresh

Keep the turn-off instructions below with your office procedure. If the code fails or routes calls somewhere unexpected, disable forwarding and ask the provider to confirm the plan-specific settings.

Every call

Turn on

Dial **21* your Penny number# then press call.

Turn off

Dial ##21# then press call (or ##002# to clear all forwarding).

Only missed calls

Turn on

No answer: dial **61* your Penny number#

Busy: dial **67* your Penny number#

Unreachable / off: dial **62* your Penny number#

(press call after each)

Turn off

Dial ##61#, ##67#, ##62# to turn each off (or ##002# to clear all).

Some older AT&T plans use *72 / *73 instead of the **codes — if a code doesn't take, try those or check your plan.

These recipes use the same data as Penny’s dashboard. Your assigned number replaces the destination text there.

You are ready when

Calls to the original business number follow the mode you selected, and the office knows how to turn forwarding off.

If the test does not pass

  • Carrier charges, voicemail behavior, and no-answer timers depend on the plan. Check those with the provider.
  • If your iPhone only offers an on/off forwarding switch, it controls all calls. Conditional forwarding uses your carrier’s own procedure.
  • For Visible, prepaid plans, or an unlisted business phone system, email support@pennyassistant.com with the provider and plan name. Do not send account passwords or PINs.

Questions about this setup

Where do I enter the forwarding instruction?

Use the handset or carrier account that controls your business number. Penny’s dashboard supplies the destination and carrier recipe; changing a Penny setting alone does not forward the original line.

Will the original phone still ring?

With overflow, your phone gets the first chance to answer. With every-call forwarding, calls go to Penny. The carrier controls the conditions and timeout, so test the mode on your own plan.